21
© MECON GmbH BA / mag-flux HTL / EN / 21-04
START-UP
4.5 Read data
In order to establish a Bluetooth connection between a Bluetooth enable and the
hydrant tester, in addition to activating the appropriate function on the mobile device, the
mag-flux HTL must be switched on with the "ON button". When the Bluetooth connec
-
tion is activated for the first time, the pairing code -1234- must be entered on the mobile
device (see also 3.4). Afterwards you have to press the "BT button". The following screen
appears:
Bluetooth off
After a successful data transmission, the
Bluetooth module should be switched off
again by pressing the "BT key", whereupon
this message appears.
BT 29.03.21 15:15
Serial number: 134669
Flow direction
HTL
As soon as a Bluetooth connection is
established between the hydrant tester
and the mobile device, the Wasserkarte-in
-
fo APP has access to the mag-flux HTL.
