page 12
PACKING INSTRUCTIONS FOR VORTEX MOTORISED TEST FRAMES WHEN
RETURNING TO MECMESIN LIMITED
1
Remove AFTI display unit, AFTI swivel bracket, upper gripping fixture and lower gripping
fixture.
2
Set the top edge of the crosshead 100 to 225mm below the top of the side pillars to
tighten both the side adjuster wheels (B).
3
Set the loading dish (A) to the lowest possible position, and tighten the central adjuster
wheel (C).
4
Place the Vortex in the plastic
5 Place the Vortex and base unit collar into outer
foam base unit collar.
box resting on two plastic foam spacers, as
illustrated.
6
Wrap gripping fixtures in bubble
7 Slide tongue of accessories sleeve between
wrap provided, place in accessories
upper plastic foam spacer, and outer box.
box, and slide accessories box into
accessories sleeve.
.
