page 8
APPENDIX 1
SYSTEM COMPONENTS
Included with Basic Test Stand
• This operating manual
• Crosshead, without a ‘Smart’ static torque transducer
• Swivel mounting bracket for AFTI *
• Lower turntable drive shaft adaptor
• Appropriate power cable
• Translation of Appendix 2 (This does not apply to English-speaking countries, or
countries outside the European Union (EU))
• Calibration certificate, for torque only - if a torque transducer is also supplied (see
below)
Essential Complementary Equipment
• Advanced Force / Torque Indicator (Part 851-401) *
At least one of:
• ‘Smart’ 10N.m static torque transducer, attached to crosshead (Part 879-044) *
• ‘Smart’ 6N.m static torque transducer, attached to crosshead (Part 879-043)
• ‘Smart’ 1.5N.m static torque transducer, attached to crosshead (Part 879-042)
Optional Accessories
• Upper universal gripping fixture (Part 432-158) *
• Lower platen with universal gripping fixture (Part 432-232) *
• RS232 to USB converter cable (Part 432-228)
• AFTI to test stand cable (Part 351-062)
• DataPlot Software (Part 840-201)
• AFTI / Stand to PC (9 pin ‘D’) RS232 cable (Part 351-059)
* Illustrated on front cover
