53
Operating Manual
|
mechatron
ATC
10 Terms of warranty
We guarantee a state of the technology faultless condition of the purchased product during a
time of 12 months after purchasing date except the spindle bearings which are covered with 6
months warranty after purchasing. We accentuate that we check the bearings for abnormal use
and abnormal dust deposit, caused by wrong cleaning or missing extraction system. In case
that a defect is caused by one of these here described improper reasons, we can charge parts or
the overall cost of the replacement to the customer.
While excluding all other claims, we will cover material faults, construction faults, and moun-
ting faults in warranty. We commit to exchange or repair faulty parts on our cost if they did not
get damaged by improper use or were modified by the customer. Basis for a warranty treatment
is that this manual is followed consequently during use of the product. In case that the manual
is not followed in any way, we can refuse a warranty treatment. All damages or abnormal cha-
racteristics have to be submitted to the manufacturer immediately. The defect devices or parts
must be sent back to us for free. A repair will be done as fast as possible. Faulty parts will be
replaced without charging material and working cost by replacement or reparation. The replaced
parts become our property. Direct or consequential damages are not covered by our responsibi-
lity. The cost of repairs or spare parts from third parties will only be paid by us, if we agreed to
this in advance in written form. We reserve the right of construction changes without informing
the customer.
We reject warranty claims in any way:
•
If the fault or its consequences (e.g. aggravation of the fault) were caused by the
reason, that the customer did not inform us immediately about it to give us the
chance of repairing it and avoid consequential damages.
•
If the product was repaired or maintained by a non authorized person or company
•
If parts were mounted at the product which we did not agree with explicit
•
If the product was modified in any other way without our agreement
•
If the product was not maintained or installed as described within this manual
•
If regular wear is caused by excessive use
Summary of Contents for ATC Series
Page 28: ...28 Betriebsanleitung mechatron ATC ATC 12055 18 ATC 12065 24 ATC 12575 12 ...
Page 56: ...56 Operating Manual mechatron ATC ATC 12055 18 ATC 12065 24 ATC 12575 12 ...
Page 57: ...57 Betriebsanleitung mechatron ATC Notizen Notes ...
Page 58: ...58 Operating Manual mechatron ATC Notizen Notes ...
