Mechatron ATC Series, Operating Manual

Page: 32 / 60

32
Operating Manual | mechatron ATC
1 Symbols, acronyms, other hints
The symbols shown in this manual should advert the reader to potential hazards. However, such
hints and warnings can never replace the necessary actions of the user according the directions
for preventing accidents!
This symbol marks a note which is important for safe operation.
Follow these notes consciously, otherwise serious injuries may be
caused.
Warning of dangerous electrical voltage
Warning of hot surfaces
The content of this manual is checked for accordance with the described machine. However,
mistakes and deviations cannot be excluded. Technical and content changes of this manual, as
well as content and literal errors reserved.
This manual is protected by international copyrights. It is strictly forbidden to copy this manual,
whether in parts, nor in the whole, without the written approval of the author. In case of violati-
on, legal steps will be taken. All rights reserved.
2 Personnel requisition for installation
and operation
For installation, initial operation and maintenance of the uncompleted machine described in
this manual, it is assumed, that the personnel is a trained electrician according to DIN VDE
1000-10:2009-01 and is especially experienced in electrical machines as well as frequency
inverters.
If the user himself is not matching these requirements, it is imperatively necessary to consult
qualified personnel for installation, initial operation and maintenance!