Mecal CDA10, Use And Maintenance Manual

Page: 25 / 119

CRIMP DATA ANALYZER
CDA10
REV.01
23
2.1.2 INTENDED AND IMPROPER USES
The CDA10, combined with the press, has been designed and built to compare the force curves of
crimping with reference curves and to check the quality of the work.
Operating specifications:
Range 0 – 20 kN
Temprerature 0 – 70 °C
The machine cannot be used for any use other than that envisaged .
HAZARD
Use of the machine for purposes not described in this manual is considered
IMPROPER USE . The Manufacturer declines all responsibility for any
damage caused to property and/or persons and deems all forms and types of
machine warranty to be forfeited. The Manufacturer declines all
responsibility in the event of tampering with the machine, for unauthorised
modifications and for maintenance operations performed by untrained
personnel.
HAZARD
In the event of abnormal behaviour of the machine or lack of power supply,
carrying out any type of movement is prohibited, as that is under the specific
competence of the operators in charge of maintenance.
CAUTION
Use of the machine by inadequately qualified and instructed personnel is
prohibited. The machine user must have read and understood this
document.