93924 – September 2015
Page 29
60-J Diesel
Operating Instructions & Pre-Operation Function Tests
Platform/Jib Functions Control Lever
The Platform/Jib Functions control lever controls the Platform Rotate and Jib Lift/Lower
functions. The control lever is fully proportional for both functions.
These functions are enabled by pressing the trigger on the front of the control lever.
Test Operation
To test the Jib Lift/Lower function:
• Squeeze the enable trigger, then pull the control lever back to raise the jib.
• Squeeze the enable trigger, then push the control lever forward to lower the
jib.
To test the Platform Rotate function:
• Squeeze the enable trigger, then push the control lever left to turn the
platform clockwise.
• Squeeze the enable trigger, then push the control lever right to turn the
platform counter clockwise.
High Capacity Switch (Optional)
ON MACHINES EQUIPPED WITH THE HIGH CAPACITY OPTION,
use the High
Capacity Switch to choose high or standard capacities.
To set the machine to Standard Capacity
(227 kg)
Move this switch to the up (227KG) position.
To set the machine to High Capacity
(340 kg)
Retract the boom, then move the switch to the down (340 KG)position. This will restrict the
Boom Extend function reach and will allow the machine to operate with more weight in the
platform. The green High Capacity Indicator Light will illuminate when this option is properly
engaged.
DO NOT
exceed the 227 kg unrestricted capacity unless the green High Capacity Indicator
Light is illuminated.
Shutdown Procedure
• When finished with the machine, place the platform in the stowed position.
• Park the machine on a level surface.
• Carefully exit the platform using a constant three (3) point dismount/grip.
• Turn the Selector Key Switch to the OFF position and remove the key to
prevent unauthorized use. Always put the switch in OFF position when
leaving the machine at the end of the work day.
ART_4733
ART_4826
ART_4734