Page 22
93924 – September 2015
60-J Diesel
Operating Instructions & Pre-Operation Function Tests
Overload Light and Alarm
• Light ON indicates too much weight on the platform.
• An audible alarm will sound and all machine function will stop.
• Remove weight from the platform to restore function and continue.
Platform Control Operation & Pre-Operation Functions Test
Entering The Platform
Personnel shall enter and exit the platform only at the Personnel Entry Gates, and only when
the boom is fully retracted and lowered.
Ensure that all Personnel Entry Gates are properly closed and that the Swing Gate is latched in
the closed position before operating the machine.
Fall Protection
Personal fall protection equipment (PFPE) is required when operating this machine.
All PFPE must comply with employer and job site rules and applicable governmental
regulations, and must be inspected and used in accordance with the PFPE manufacturer’s
instructions.
ALWAYS wear approved fall protection, properly attached to a designated anchor point, when
operating the machine. Adjust the lanyard length to keep it as short as possible with respect to
the work task being performed.
DO NOT attach more than one lanyard per anchor point.
ART_3528
ART_4726
Swing
Gate
Personnel Entry Gates
Lift Gate
Lift Gate
ART_4713