Page 11 Version 2
Step 19
– Press the fire button on the pull cord or wireless release. This will cause the machine to
fire a clay target and then reset to the firing position. Pressing the fire button again will do the same
as above. Pressing and holding the fire button will continuously fire clays continuously
Your machine is now operating smoothly and ready for use.
It is critical that you never load or
make adjustment to the machine unless it is disarmed and the power disconnected.
While in
storage, the machine must be left in the disarmed state and the power/battery disconnected. Any
spring tension does not need to be released.
Your machine is now operating smoothly and ready for use. It is critical that you never load or make
adjustment to the machine unless it is disarmed, and the battery disconnected. While in storage, the
machine must be left in the disarmed state and the battery disconnected. Any spring tension does
not need to be released.
For all ATA rules and guidelines please see the link below.
https://www.shootata.com/Portals/0/pdf/ata_rulebook_web.pdf
