EHC
‐
PM
.
6
.
Input the unit price directly
：
1. Use numerical key to enter unit price (range: 0000.00
～
9999.99)
2. Press ENTER key within 3s to confirm the unit price
3. Press CLEAR key to remove the input number
4. Put the weighing objects, the WEIGHT window will show its weight and TOTAL PRICE window will show its total value.
Note: After unit price is entered, if there is no operation in 3s, the scale with automatically confirm the unit price and exit
the mode. If under non-save mode, the unit price will be cleared automatically after weighing and removing the objects.
Set and Recall direct and indirect PLU
：
1. Under the normal weighing mode, press ST.PLU key, "St.PLU" will be shown in WEIGHT window and "Addr." (prompt
to input PLU's address ) will be shown in UNIT PRICE window (The Address range is from 1 to 265, 1-9 is for direct
PLUs). The UNIT PRICE window will display the input address.
2. Input the Address by numerical keys 0
～
9 and CLEAR key, use ENTER key for confirmation to go to the next step,
or press ON/OFF EXIT key to exit this mode and return back to the normal weighing mode.
3. When the TOTAL PRICE window displays “NAME” (prompt to input trade name), the UNIT PRICE window shows empty
or the last six characters of the trade name.
4. Use numerical keys and CLEAR key to input the trade name (the length of the trade name is 20 characters), use
ENTER key to confirm the characters on flashed position or confirm the trade name, or use ON/OFF EXIT key to exit
this mode and return back to the normal weighing mode.
5. When the TOTAL PRICE window displays “iNGrdt” (Ingredients, prompt to input ingredients, only available when
232.out is set to PRTd60), the UNIT PRICE window shows empty or the last six characters of the ingredients.
6. Use numerical keys and CLEAR key to input the ingredients (the length of the ingredients is 80 char), use ENTER
key to confirm the char on flashed position or confirm the ingredients, or use ON/OFF EXIT key to exit this mode and
return back to the normal weighing mode.
7. When the TOTAL PRICE window displays “LIFE” (prompt to input shell life), UNIT PRICE WINDOW shows input data.
8. Use numerical keys and CLEAR key to input the LIFE(<=253), use ENTER key to confirm, or press ON/OFF EXIT
key to exit this mode and return back to the normal weighing mode.
9. When "Unit.0" or "Unit.1" is shown in the UNIT PRICE window, that means the weight unit of the stored unit price is
per Kg (Unit.0) or per lb (Unit.1). The TOTAL PRICE window will show empty.
10. Use UNIT key to choose $/kg or $/lb, press ENTER to save the chosen unit and go to the next step, or press
ON/OFF EXIT to exit the input and return back to the normal weighing mode.
11. The TOTAL PRICE window displays “UNit.P” (prompt to input unit price ), the UNIT PRICE window shows input data.
12. To press 0
～
9 and CLEAR key to input the unit price, press ENTER key to store and confirm, or press
ON/OFF EXIT key to exit this mode and return back to the normal weighing mode.
13. The TOTAL PRICE window displays "tArE" (set the digit tare), the UNIT PRICE window displays the entered data.
14. Use the numerical keys 0-9 and CLEAR key to input the tare weight, use ENTER key to store and confirm, then go
to the next store unit setting, namely, plus one to the last Address, then repeat the steps from 1-14; Or
press ON/OFF EXIT key to give up input and back to the normal weighing mode;
