manualshive.com logo in svg

Measuretek EHC-PM Series, User'S & Technical Manual

Share
Download
Measuretek EHC-PM Series User'S & Technical Manual Download Page 15

 

                                                                     

EHC

‐

PM

 

 

.

 

13 

.

 

2.    Software searches all serial ports on PC, and tries to connect with the scale. In the Status bar, it will separately   
      display present serial port, baud rate, data format. Take the following figure for example, “COM2,2400,8N1” refers   
      to the present serial port COM2, baud rate 2400, data format 8N1. If the connection status displays “Connecting the   
      scale”, it means the Software is searching EHC-PM scale, if it displays “The scale is connected”, it means the Host   
      has been connected with the scale.   
3.    The Software can search all the present serial ports automatically, until connect with the scale. Manual connection is   
      also available by use “Serial Set” in “Serial” menu.   

 

 

 

 

 

 

 

 

 

 

 

 

 

4.    Press “Open” or “open file” button in “File” menu, it will first remind you whether to save the current file, and then   
      open the file and dialogue box to choose and open the right file.   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for EHC-PM Series






















Reviews:

No comments

Brands by name

Popular brands

Load more brands