MDS NETio Series, Installation & Operation Manual

Page: 28 / 96

20 MDS NETio Installation & Operation Guide MDS 05-4457A01, Rev. A
Invisible place holder
Figure 2-3. Local NETio Configuration Setup
With a PC connection made, log into the Base Module as follows:
1. Press the key to receive the
Login
prompt. The
COM1
LED
flashes to indicate data communications.
2. At the
Login
prompt, enter the username (
admin
is the default user-
name). Press .
3. At the
Password
prompt, enter the password. (
admin
is the default
password). Press
.
Upon successful log-in, the Starting Infor-
mation Screen appears.
2.3.1 Starting Information Screen
Upon successful log-in the Starting Information Screen ( Figure 2-4 )
appears. This screen provides a read-only overview of the Base
Module’s current operating conditions.
Quick Start
Step #3:
Select
G
to go the Main Menu. Refer to Section 2.3.2, Main Menu
for detailed information.
PC Running Terminal Session
(19,2000 bps, 8N1)
Base Module
COM1 Port
ETH
COM1
PWR
LINK
COM1
ETH
DI-1
DI-2
DO-1
DO-2
LINK
ETH
WeXP
ENTER
ENTER
ENTER