MDS NETio Series, Installation & Operation Manual

Page: 40 / 96

32 MDS NETio Installation & Operation Guide MDS 05-4457A01, Rev. A
Invisible place holder
Figure 2-14. I/O Module Configuration Menu
2.4.5 I/O Module Menu
The I/O Module Menu ( Figure 2-15 ) is where general NETio module
parameters can be viewed or set.
Quick Start
Step #15:
Select B and enter the WeXP Network Address to match the
address entered in Section
2.3.6 above. Proceed to Section 2.5 if an
entraNET AP will be used. Otherwise, refer to Chapter 3.
Invisible place holder
Figure 2-15. Module Menu
2.4.6 Check for Normal Operation
When all modules have been configured, you should use all modules in
the I/O Network Menu. Note that you will only see Wireless Expansion