8
OEM Series™ I/O Guide
MDS 05-3624A01, Rev. B
2.2 Mounting the Transceiver
Transceiver Board
shows the mounting dimensions of the transceiver PC board.
The board should be secured to the mounting surface using the holes
provided at each corner of the assembly. (Fasteners are not supplied.)
Note that the lower left mounting hole in the board is a threaded ferrule.
Invisible place holder
Figure 6. Transceiver Mounting Dimensions (Board Version)
Enclosed Transceiver
shows the mounting dimensions of the enclosed transceiver.
Two cutout slots are provided on each side of the enclosure for
mounting screws. (Fasteners are not supplied.)
Invisible place holder
Figure 7. Transceiver Mounting Dimensions (Enclosed Version)
RF
DATA
PWR
4.53 in.
(11.51 cm)
0.23 in.
(0.58 cm)
3.23 in.
(8.20 cm)
0.28 in.
(0.71 cm)
3.73 in.
(9.47 cm)
0.28 in.
(0.71 cm)
0.20 in.
(0.51 cm)
4.05 in.
(10.29 cm)
HEATSINK
2.5 in.
(6.35 cm)
1” in.
(2.54 cm)
HEATSINK HEIGHT: 0.38” (0.97 cm)
3.25 in.
(8.25 cm)
5.00 in.
(12.70 cm)
1.75 in.
(4.45 cm)
5.97 in.
(15.14 cm)
6.50 in.
(16.51 cm)
