MDS 05-3624A01, Rev. B
OEM Series I/O Guide
iii
Copyright Notice
This Installation and Operation Guide and all software described herein
are protected by
copyright: 2001 Microwave Data Systems Inc
. All
rights reserved.
Microwave Data Systems Inc. reserves its right to correct any errors and
omissions in this publication.
Antenna Installation Warning
1. All antenna installation and servicing is to be performed by
qualified technical personnel
only. When servicing the antenna, or
working at distances closer than those listed below,
ensure the
transmitter has been disabled.
2. Typically, the antenna connected to the transmitter is a directional
(high gain) antenna, fixed-mounted on the side or top of a building,
or on a tower. Depending upon the application and the gain of the
antenna, the total composite power could exceed 90 watts EIRP. The
antenna location should be such that only qualified technical per-
sonnel can access it, and that under normal operating conditions no
other person can touch the antenna or approach within
2.3 meters
of
the antenna.
ISO 9001 Registration
Microwave Data Systems adheres to this internationally accepted
quality system standard.
RF Exposure
Separation distances
required for FCC RF
Exposure compliance
Antenna Gain vs. Recommended Safety Distance
(EL705 OEM Series)
Antenna Gain (EL705 OEMSeries)
0–5 dBi
5–10 dBi
10–16.5
dBi
Minimum RF
Safety Dis-
tance
0.6 meter
1.06 meters
2.3 meters
