ICE FOG
Q
TM
User Guide, Revision A/d, May 2017
4 / 16
BASIC DESCRIPTION
The
ICE FOG
Q
TM
was designed with safety and reliability in mind. They are capable of
generating pure white low fog for as long as you want (100% duty cycle) at full volume.
The
ICE FOG
Q
TM
is a variable output Low Fog Generator capable of generating large
volumes of very dense low fog in a short period of time and also the most silent one on
the market.
At the heart of the MDG Generators is an electronic assembly that keeps the heating
module(s) at a very stable temperature, which integrates three types of fail-safe systems.
Those three types of electronic fail-safe systems are designed to protect against over and
under-heating conditions and, against component failure.
The temperature is maintained within a narrow margin (the HEAT yellow LED turns on &
off from time to time to indicate the control of temperature) otherwise, an error
condition will result and the Low Fog Generator will shut down. When one of the safety
systems is activated, the HEAT yellow LED will start blinking indicating the fail mode. Shut
down the main power switch, wait 3 to 4 minutes and retry the generator. If the fail
mode still appears, unplug your generator and contact a MDG authorized service center
for verification.
When an under-heating condition occurs, the generator will stop producing fog until the
temperature of the heating module is back within parameters.
Summary of Contents for ICE FOG Q
Page 2: ...ICE FOG QTM User Guide Revision A d May 2017 2 16 Intentionally left blank...
Page 13: ...ICE FOG QTM User Guide Revision A d May 2017 13 16 TECHNICAL DIMENSIONS...
Page 15: ...ICE FOG QTM User Guide Revision A d May 2017 15 16 DECLARATION OF CONFORMITY...
Page 16: ...ICE FOG QTM User Guide Revision A d May 2017 16 16 NOTE...