eMINI fogger
User Guide, Rev: A/a, April 2020
18 / 28
B
OOTLOADER
The MDG
eMINI
uses a BootLoader, also called boot manager. This program is a firmware (software
embedded in a hardware device) located into the non-volatile memory of the microcontroller unit (MCU)
that allows in-circuit reprogramming of the device using its USB communication port.
To upgrade the firmware, you will need:
•
a computer running under Windows, with a USB 2.0 connector
•
special driver for the USB, included in the package,
•
a standard USB 2.0 cable, A to B Male/Male type
Contact the MDG Service to have the last package firmware upgrade for the MDG
eMINI
.
RDM
C
ONTROL
The MDG
eMINI
can be controlled via a RDM ANSI E1.20 protocol, an intelligent bi-directional
communication utilizing the DMX512 data link.
RDM allows a console or other controlling device to discover and then configure, monitor, and manage
intermediate and end-devices connected through a DMX512 network. RDM provides for intelligent control
of devices on a DMX512 network, which has not been previously available outside of proprietary networks
RDM Control has the same functionalities than the DMX Control (
see DMX Control
) with bi-directional
functions allowing the user to read or write specific functions.
Summary of Contents for eMINI
Page 2: ...eMINI fogger User Guide Rev A a April 2020 2 28 Intentionally left blank...
Page 25: ...eMINI fogger User Guide Rev A a April 2020 25 28 DIMENSIONS...
Page 27: ...eMINI fogger User Guide Rev A a April 2020 27 28 DECLARATION OF CONFORMITY...
Page 28: ...eMINI fogger User Guide Rev A a April 2020 28 28 NOTES...
