5
6. Attach the Horizontal Frame Brace Tube (#5 & #6) to Left and Right Support Tube(#3 & #4) using Bolts(#27),
Washers (#22) and Nuts(#28), and then attach the Horizontal Frame Brace Tubes(#5) to the Angle Bottom
Support Tube (#8) using Bolts (#27), Washers (#22) and Nuts(#28) as shown in FIG4.
7. Attach the Angle Support Tubes (#7 & #8) to the Vertical Support Mounting Tube(#2) using Bolts(#24), Washers
(#22) and Nuts(#28) as shown in FIG4, repeat this step for other side.
Note: Make sure the spring lock is face down.
8. Attach the Short Horizontal Cross Brace(#12) to the Vertical
Board Support Mounting Tube using Bolts(#25), Washers(#22)
and Nuts(#28) as shown in FIG5. And then insert the Net
Hanger Tubes (#1) to the Vertical Board Support Maunting
Tubes (#2) as shown in FIG.5.
FIG. 4
FIG. 5
FIG. 4
8
7
5
6
8
7
5
6
3
28
22
22
27
24
28
22
22
2
4
28
22
27
22
FIG. 5
12
1
2
1
22
28
25
22
