MD Diagnostics RP Check, Operating Manual

Page: 17 / 27

16
Select Save Directory - this will allow you to select the directory as the
default directory where you wish to save the PDF reports created by the RP
Check Software
Export PDF
– this will create and export the PDF report document to the
selected folder
– the format for saving PDF’s is the patients ID followed by
the date and time the PDF was created.
Show Patient details
– this will show the patient details that have been
completed for the aptient , along with the healthcare professionals name
and the organizations name. These details can be changed at any time
prior to exportimg the tests to a PDF format.
Select Test type
– this is required when the RP Check is connected to the
PC for performing “live” tests, the PC software needs to be told which test
is being performed, select MIP, MEP or SNIP form the drop down. The
corresponding predicted value should also be chosen from the drop down
choice.
The + symbol will show a list of numbers in circles and these will
correspond to the individual tests. The circles encasing the numbers are
colour coded as follows:
Gold/yellow is the Best test
Green shows the test is within 20% of the best test
– as per the ATS/ERS
Guidelines
Blue shows the test is technically acceptable and lasted for the required 1.5
seconds but falls outside of the 20% reporducibility criteria. Selectng the
individual circle will display the corresponfing test.
Once a test has been selected and reviewed and it is deeemed
unacceptable by the healthcare professional then selecting the
Delete
current Test, will delete the test from the list .
NOTE: the numbering will stay the same but the numbered circle will now
appear grey.
Selecting Show ALL Tests will display all the tests performed overlaid on
top of each other.
Selecting Export to PDF will export the PDF to the chosen directory and will
show the patients details, a table of results, the Best pressure trace graph
and All pressure trace graphs