5
If a patient has previously been tested, then the results are stored on the
device along with the corresponding mouth or nasal pressure graphs. The
options available will then be displayed:
The three options available are:
YES
– to Upload the current test records to the PC software, to perform this
please see section on PC Report.
NO
– selecting this will change the screen to the test type option.
NOTE:
If NO is selected, the previous
patients’ tests will be over written,
the device only keeps the last test results in the memory.
CONTINUE TESTING
– the display will change the display back to the test
screen with the last graph displayed, pressing the ENTER key will change
back to the test icon and allow tests to be performed.
NOTE:
The continue testing option allows the previous test type to
continue, there is not an option to change the test type
– for example if the
patient was performing MIP tests and needed a rest and the device turned
OFF due to timing out or was turned OFF, the results and graphs are saved
on the device and MIP testing will be resumed if the Continue Testing
option is chosen.
NOTE:
Once a test type has been selected the unit will continue giving an
audible beep to advise the operator that no flow is currently detected
through the unit. Once the patient begins the manoeuvre the audible beep
will be longer, to signify the start of the test.
UPLOAD LAST TEST
TO COMPUTER?
YES
NO
CONTINUE TESTING
Summary of Contents for RP Check
Page 18: ...17...
