PELLET STOVES
Chapter 3
INSTALLATION AND USE MANUAL
page
18
Installation and assembly
Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
3.2.
PREPARATION AND UNPACK ING
The KAIKA OYSTER stove
is delivered in one sole package formed
of:
o
Structure packaging
o
Side and top packaging (Fig.1)
Open the packaging, remove the four screws that secure the base of
the stove to the pallet, two to the right and two to the left (see figure
2), and position the stove in the selected place, ensuring that it is
complies with the above instructions.
The stove body or unit must always be kept in a vertical position when
moved, and moved only using carts. Special care must be used to
protect the door and the glass from impacts that would damage them.
Moving the product must always be done with care. If possible, unpack
the stove in the area where it is going to be installed.
The materials which make up the packaging are not toxic or harmful, so
no special procedures for disposal by required.
Their storage, disposal or possible recycling are therefore the responsibility of
the final user, in compliance with current legislation on the subject.
Do not store the stove unit or its cladding without their packaging.
Figure 1
– Stove packaging + steel
sides Kaika stove
Figure 2
- Removing packaging screws
Kaika stove
