Extreme Series 10.1" Monitor/DVR System
© 2022 McNeilus Truck and Manufacturing, Inc.
9
Installation
the monitor system to come on when the vehicle is placed in reverse.
e. Connect the power accessory harness to the power socket on the rear side of the monitor.
5. Bolt the monitor in the bracket, and adjust the position as needed for the driver's view.
6. Clip the provided sun shield onto the monitor using the provided hardware, if desired.
Master Cable Harness
1
2
3
4
5
6
7
8
9
10
11
12
13 14
15
16
17
18
19
20
21
22
23
24
1
2
3
4
Front view
24P male plug
Front view
4P male plug *6
AU
VI
GND
VCC
CH1
CH2
CH3
CH4
CH5
CH6
240±20
2000±80
OD 7.0
K278
Wire
Function
Note
BROWN (Color Wire 4 Pin Connector)
CH 1
For Backup / Reverse Camera Connect
BROWN (Color Wire 4 Pin Connector)
CH 2
For Left Camera Connect
BROWN (Color Wire 4 Pin Connector)
CH 3
For Right Camera Connect
BROWN (Color Wire 4 Pin Connector)
CH 4
For Driver / Facing Forward Camera Connect
BROWN (Color Wire 4 Pin Connector)
CH 5
For Front / Hopper Connect
BROWN (Color Wire 4 Pin Connector)
CH 6
For Misc Camera Connect
GPS ANTENNA CONNECTOR
GPS
To connect the GPS Antenna to the monitor
Camera Connection Pin Assignment
4
1
3
2
Pinout from the Monitor side to
the Camera connector.
Pin Assignments:
Pin 1 = GND (Ground)
Pin 2 = +12V (Power)
Pin 3 = Video
Pin 4 = Audio
