McLaren SUPER SERIES, Owner'S Handbook Manual

Page: 65 / 268

Driving Controls
Starting and Driving
2.9
2. Depress the brake pedal, press and
release the START/STOP button and
the engine will start.
3. If the START/STOP button is pressed
again while the engine is cranking,
cranking is stopped.
Stopping the engine
1. Depress the brake pedal.
2. Select neutral.
3. Press the START/STOP button. The
engine stops, the vehicle enters Awake
mode, see Vehicle electrical status,
page 2.2. The immobiliser is activated.
NOTE: The parking brake will apply
automatically when the engine is
stopped. Automatic application can be
overridden by holding the parking
brake switch in the off position whilst
opening the driver’s door.
Eco Start-Stop system
This system automatically stops the engine
when conditions allow in order to reduce
fuel consumption and exhaust gas
emissions and restarts it again when
required.
The following conditions must be met for
the system to automatically stop the engine:
•
Driver is detected as present
•
Driving speed exceeded 6 mph (10
km/h) since previous stop
•
Engine at normal operating
temperature
•
Vehicle battery fully charged
•
Air conditioning demand not too high
•
Comfort Powertrain mode active
p14.book Page 9 Tuesday, October 24, 2017 11:15 AM