McLaren SUPER SERIES, Owner'S Handbook Manual

Page: 197 / 268

Maintaining Your McLaren
Fluid Topping Up
6.3
NOTE: Once the oil level check has
been completed and returned a value,
do not continue to test the system.
This may lead to aeration of the oil and
return a false value. To end the oil level
check, release the throttle pedal and
return to the Vehicle info menu by
moving the menu stalk back.
Topping up the engine oil
1. Open the service cover.
See Service cover, page 1.8.
2. Unscrew the engine oil filler cap.
3. Top up with the correct quantity of
Mobil 1 FS 0W-40 engine oil. Refer to
Top up quantity, page 6.3.
4. Check the Driver Display to ensure level
is correct.
NOTE: If you have inadvertently
overfilled the engine with oil, you
must have any excess removed at your
McLaren retailer. The engine or the
catalytic converter could be damaged.
5. Refit the engine oil filler cap.
ENVIRONMENTAL: When topping up,
take care not to spill any oil. Oil must
not be allowed to escape into the soil
or waterways.
NOTE: Ensure the oil filler cap is
refitted correctly.
6. Close the service cover
See Service cover, page 1.8.
Top up quantity
Based on the oil status displayed on the
Driver Display, add the required quantity of
oil as shown in the following table, then
check the engine oil level again.
Segments on display Quantity of oil
required
1 - red - under filled 0.90 litre
2 - amber - min. 0.70 litre
3 - green - OK 0 litre
4 - green - OK 0 litre
5 - green - OK 0 litre
p14.book Page 3 Tuesday, October 24, 2017 11:15 AM