McLaren ARTURA, Owner'S Handbook Manual

Page: 249 / 326

3. Refer to the fuse specification to determine
which fuse protects the non-functioning
electrical system, see Main fuse box fuse
specification chart, page 6.25.
NOTE: A label identifying the fuses is
attached to the inside of the access
panel.
4. Remove the appropriate fuse and replace
it with a fuse of the same value as the
original. If in doubt, check the fuse
specification chart.
5. Fit the access panel by inserting the two
upper retaining clips in the bulkhead and
securing with the two lower clips.
NOTE: If a replacement fuse does not
solve the electrical problem, or it fails
immediately, contact your McLaren
retailer.
Main fuse box fuse specification chart
Circuit protected Amps No.
Domain Controller ZB2 60 F1
Domain Controller ZC1 60 F2
- - F3
- - F4
- - F5
- - F6
Starter 30 F7
Heated Rear Window 20 F8
Audio Amplifier 20 F9
- - F10
- - F11
HYCU 30 F12
HV BMS 3 F13
Circuit protected Amps No.
Permanent Battery 5 F14
Relays 15 F15
Pyro Feed In 3 F16
MCU 10 F17
ECU Main Relay Feed 50 F18
Fuel PEM Relay 1 40 F19
Seat Driver 20 F20
Seat Passenger 20 F21
eMotor Cooling Pump 20 F22
eMotor Cooling Fan 15 F23
Infotainment ECU 10 F24
Infotainment ECU Safe 2 F25
Auxiliary USB Board 7.5 F26
SVCC/RVC 2 F27
6.25
Maintaining Your McLaren
Fuses
R