McLaren ARTURA, Owner'S Handbook Manual, Page: 87 / 326

• The engine’s torque is no longer limited
and the drive wheels could spin
• The anti-lock braking system remains
activated
Electronic stability control (ESC) Dynamic
mode
Electronic stability control Dynamic mode can
be selected at any vehicle speed.
1. The electronic stability control is ON by
default.
2. Press the ESC OFF button briefly to activate
Dynamic mode which allows more dynamic
freedom over the default ESC ON mode.
ESC DYN will be displayed on the Driver
Display and the ESC OFF warning light will
illuminate.
Variable Drift Control (VDC)
NOTE: Variable Drift Control (VDC) is
only available if the following
conditions are met:
• ESC Dynamic mode active
• Vehicle speed less than 62 mph (100
km/h)
• Vehicle being driven in a straight line
The amount of drift permitted by the ESC in
Dynamic mode can be adjusted.
Variable Drift Control (VDC) can be accessed on
the Central Display. This allows the driver to
select the precise level of electronic stability
control support that they would like.
Select Variable Drift Control from the Home
menu and switch the slider to
On to activate the
feature.
Select < or > to decrease or increase the amount
of drift to suit your preference.
ESC Off
1. If not already in ESC Dynamic mode, press
the ESC OFF button briefly to activate ESC
Dynamic mode.
2. Press and hold the ESC OFF button for 2
seconds, followed by a confirmation press
again within 5 seconds to deactivate the
electronic stability control.
ESC OFF will be displayed on the Driver
Display and the ESC OFF warning light will
illuminate.
2.31
Driving Controls
Driving Safety Systems
R