McLaren ARTURA, Owner'S Handbook Manual

Page: 51 / 326

2. For a fast single wipe, push and hold the
wiper stalk down. The windscreen wiper
will perform a continuous fast wipe until
the stalk is released.
Windscreen wash/wipe
Pull the wiper stalk towards you.
The windscreen washers and wiper will initially
operate at a slow speed while the stalk is held.
When the stalk is released, the wiper will
complete its cycle and return to the parked
position. After a period of time the wiper will
operate once more to wipe any remaining
washer fluid from the windscreen. If the vehicle
is travelling at high speed, the wiper will operate
an additional wipe to clear the windscreen.
NOTE: The position of the washer jets
are set during vehicle manufacture and
should not need adjusting. If a problem
occurs, consult your McLaren retailer.
Wiper park positions
In addition to the normal park position, there are
two alternative positions.
Ensure the vehicle is in Locked, Sleep or Awake
mode.
Pull the wiper control stalk towards you, the
wiper will move through the following park
positions each time the stalk is pulled:
Winter park
The wiper is parked vertically to reduce the risk
of damage to the wiper arm during periods of
heavy snowfall and provide access for easier
cleaning of accumulated snow.
Service park
The wiper is parked diagonally to provide access
for replacing the wiper blade, see Replacing the
wiper blade, page 6.36.
Normal park
The wiper is parked horizontally along the lower
edge of the windscreen.
1.41
Before You Drive
Washers and Wipers
R