EXTender 6000 Quick Installation Guide
30
IP Parameters
An Internet Protocol (IP) address and associated routing parameters must be entered within the IP menu
of the EXTender for identification purposes within the LAN.
Note: The network administrator must provide the IP address and any required mask or router addresses
.
Settings
The following IP settings are required:
Addres
s- This is the IP address of the EXTender.
Subnet Mask
– A number used to identify the IP subnetwork on the LAN.
Default Router
– The address of a device used to reach IP hosts not on this IP sub-network.
Procedure
1. Access the IP Menu using the following path;
Path:
->Configuration->IP->Address
The following menu appears:
Figure 20: IP Address Menu
2. Press
the
Æ
key to access the parameters.
3. Press
the
Æ
key to the
Address
parameter. Enter the IP Address of the EXTender and press
Enter.
4. Press
the
È
key to the
Subnet Mask
parameter. Enter the IP Address of the Subnet Mask and press
Enter.
5. Press
the
È
key to the
Default Router
parameter. Enter the IP Address of the Default Router and
press
Enter.
6. Press
the
Å
and
È
key to the
Save
option. Press
Enter
to save changes to the active config (.
re
m)
file.
