EXTender 6000 Quick Installation Guide
22
Setting the Sync Rate
Procedure
1. Access
the
WAN 1
or
WAN 2 Sync_Setup Menu
using the following path;
Path:
Remote or Gateway->Configuration->WAN 1 or 2->Sync_Setup
The following menu appears.
Figure 10: Sync Rate
2. Press
the
Æ
key to the
Sync Rate
parameter and type in the correct Sync rate. This parameter sets
the synchronous data transfer speed of the WAN port and must match the network device speed.
Note: This Sync Rate information, displayed in bytes, must be obtained through the network device
documentation.
3. Press
the
Å
key to accept changes and go back to the Configuration Menu.
4. Press
the
È
key to the
Save
parameter.
5. Press
Enter
to save changes to the active config (.
re
m) file.