17
3. Now rotate the INPUT CONTROL Clockwise
until the Front Panel Display indicates “McIntosh
USB AUDIO, V_.__ Firmware”. Refer to figure 3
and to page 18 for additional information.
4. Next, rotate the INPUT CONTROL Clockwise
again until the Front Panel Display indicates
“SOURCE: UNBAL, NAME: UNBAL” Refer to
figure 4.
5. Rotate the INPUT CONTROL Clockwise again
to select other Setup Functions. Refer to pages 18
thru 20.
6. To exit from the Setup Mode, press the INPUT
CONTROL and the Front Panel Display will revert
back to its normal display. Refer to figure 1.
Your McIntosh MXA70 has been factory configured
for default operating settings that will allow immedi-
ate enjoyment of superb audio without the need for
further adjustments. If you wish to make changes to
the factory default settings, a Setup Feature is pro-
vided to customize the operating settings using the
Front Panel Display. Refer to the MXA70 Front Panel
Illustration on the previous page while performing an
introduction into operating the Setup Mode, follow the
steps below.
Note: If the MXA70 is currently On, proceed to step
2.
1. Press the STANDBY/ON Push-button on the Front
Panel or press the (Power) Push-button on the
Remote Control to switch On the MXA70. The
MXA70 will go through a brief startup intializa-
tion with the Front Panel Display indicating the
last used input and volume setting. This is fol-
lowed by the volume setting indication starting at
zero and then increasing to the last used volume
setting. Refer to figure 1.
2. Press and hold in the INPUT CONTROL until the
Front Panel Display indicates “MXA70 V_.__,
S/N: _______”. The information indicated on the
Front Panel Display includes the Model Number,
Firmware Version and the Serial Number for this
unit; see page 18 for additional information. Refer
to figure 2.
How to Operate the Setup Mode
The Default Settings Chart below indicates the Func-
tion Name, Default Setting and the Page Number for
additional information.
Default Settings
Default Settings
Function Name
Setting
Page No.
MXA70
V_._ _
S/N: _ _ _ _ _ _ _
18
McIntosh USB Audio
V_.__
18
INPUT NAME
(Re-asign Input Names)
INPUT:_________
NAME:__________
18
SPEAKER MODE
SMALL
19
SUBWOOFER MODE
DISABLED
19
POWER MODE
(Auto Off)
ON
20
REMOTE CONTROL
ENABLED
20
Setup
Note: Setup Mode operations should be performed
in the order they appear in the Setup Menu as
they are interactive.
Figure 1
INPUT: UNBAL
20%
Figure 3
MLI USB Audio
V_.__
Figure 4
INPUT: UNBAL
NAME: UNBAL
Figure 2
MXA70 V_.__
S/N: _______
Summary of Contents for MXA70
Page 9: ...9 Notes...
