48
When a Dolby Digital or DTS Signal is present the
MX136 will automatically decode the information either as
Mono, Stereo, Surround or 5.1 discrete depending on the
information contained in the signal. If a 5.1 signal contains
back surround information (Dolby Digital EX or DTS ES/
EX), the decoder will reproduce all 7.1 channels of infor-
mation.
Cinema 2
The Front Panel Alphanumeric Display will indicate CIN-
EMA 2 and the appropriate Front Panel Operating Mode
Display LEDs will illuminate. Refer to figure 56. This pro-
vides DTS NEO:6 processing Analog Signals and 2-Chan-
nel Digital Signals.
When a Dolby Digital or DTS Digital Signal is present
the MX136 will automatically decode the information either
as Mono, Stereo or Surround depending on the information
contained in the signal. If the signal contains 5.1 or more
channels of information, the decoder will automatically re-
produce the signal as 7.1 channels of information.
External
All internal signal processing is bypassed and the eight
Rear Panel EXTERNAL INPUTS are activated so the
MX136 performs as an Eight Channel Preamplifier for an
external source or processor. The Front Panel Alphanu-
meric Display indicates EXTERNAL. Refer to figure 57.
Note: Approximately 3 seconds after selecting EXTERNAL
SURROUND MODE, the Front Panel Alphanumeric
Display will change, indicating EXTERNAL, to the
normal display of INPUT A, INPUT B and percentage
of VOLUME.
Figure 57
How to Operate the Surround Mode, con’t
Figure 55
Figure 56
Summary of Contents for MX136
Page 23: ...23 Notes ...
