McHale
W2020
Round Bale Wrapper
39
Machine settings 1
This menu allows the user to adjust settings in relation to bale wrapping. The toggle
key (button C) can be used to scroll between each setting. When the arrow is beside
the required setting then the + and - soft keys can be used to increase/decrease the
value.
Press ‘ESC’ to return to the main menu.
Number of wrapping revolutions
Film layers are set by the number of dispenser rotations.
Count the number of rotations required to cover the bale
once and add 0.5 of a rotation, then multiply this resultant
figure by half the number of layers required, e.g. (3.5 +
0.5) x 2 = 8 rotations for four layers. Use the + and - soft
keys to adjust this figure. The setting ranges from 1 (min)
to 36 (max). The default setting is 8.
Film sensor
The film sensor monitors the passage of film through the
dispenser rollers. The film sensor may be switched off, if
desired.
Auto load
In AUTO mode with Auto load turned on, one touch of
load bale (Button 6) loads the bale into a wrapping
position. The load button must be pressed and held if
Auto load is set to off or when in MAN mode.
Auto load time
When picking up a bale, this sets the time in seconds
from the fully-out position to the fully-in position for Auto
load.