McHale
W2020
Round Bale Wrapper
29
5.7 Connecting the control box
The electronic control box must be located inside the tractor cab in the operator’s field
of vision and within easy reach of the red emergency stop button.
. Secure the control unit in the tractor cab, using the V-brackets and
fasteners provided. The male half attaches to the control box and the female half
attaches to the tractor cab allowing for quick placement/removal, every time it is used.
Ensure that the cable to the machine is not under tension and not near sharp edges,
etc. The electric power supply is obtained from the socket of the tractor
.
Connect the supplied fused electric power lead to the tractor battery ensuring to route
away from sharp edges and hot surfaces. The control box is not waterproof, it must be
protected from rain.
5.8 Attaching wrapper to tractor
1.
Reverse tractor up to wrapper lining up the lift arms of the tractor with the lower
link pins of the wrapper.
2.
Fit lower link pins ensuring they are secured with linchpins. On tractors with
quick attach lift arms ensure mechanisms are in the locked position.
3.
Attach top link. Again ensure all pins are secured using linchpins.
4.
Connect all hydraulic connections securely.
5.
Screw the 37-pin socket on the electronic box and the 37-pin plug on the
machine together.
6.
Connect control box to tractor socket
or
battery using the power cable
provided. There must be a good 12 V supply to the control box.
7.
Check that all functions operate correctly.
8.
The machine is now ready to work.
CAUTION: Do not connect the control box to a 24 V power supply
Do not attempt to connect the control box to a 24 V power supply, as
machine component damage will result.
WARNING: Turn off tractor before connecting hosing
When connecting hydraulic hosing to the tractor, ensure that the tractor
engine is turned off and that the ignition key is removed. Ensure that all
hydraulic connections are correctly tightened.