McHale
Twiner
27
6.3.2 Manual mode (MAN)
Press and hold softkey 1 to feed in the twine. The moving
roller will engage and following a short delay the electric
motor will switch on, to feed in both twines.
Press and hold softkey 2 to reverse the twine track, towards
the centre of the bale.
Press and hold softkey 3 to drive the track forward, towards
the edge of the bale.
6.3.3 Automatic mode (AUTO)
The twine track must be in the home position for an
automatic twine sequence to begin. (Both twine feed icons
show as white circles.)
When baling begins a small amount of twine is pre-fed into
the chamber.
At a preset size, a warning beep will sound to indicate that
the bale is nearly full.
When the bale is close to the target diameter the moving
roller engages and another small amount of twine is pre-fed
into the chamber.
At 100% the twine is fed into the chamber. (Both twine feed
icons start rotating when the twine feed motor switches on.)
When both twines are detected, the track motor switches on
and moves the twine forward to the edge of the bale.
The icons show as a white circle if the track is in the
home position and no twine is feeding.
The icons show as a black circle if the twine has run out
or has failed to feed.
