manualshive.com logo in svg

McHale Twiner, Operator'S Instruction Manual

Share
Download
McHale Twiner Operator'S Instruction Manual Download Page 25

McHale

 Twiner

25

6.3  Control box features 

When the control box is first switched on it displays ‘

McHale

 

V6

’ along with the machine 

model and software version number.

After a short delay, the working display appears. The working display features an 
image of the machine, which is surrounded by general working information.

The machine has two operating modes; manual (MAN) or automatic (AUTO).

AUTO is selected by pressing the AUTO/MAN button. The selected mode is displayed 
in the top right corner of the screen. (AUTO can only be selected if the chamber door 
is closed.)

The control unit has all vital information displayed on the screen. The main working 
screen displays the most important information. The 2nd and 3rd working screens 
display some extra information on the right hand side, which can be accessed by 
pressing the ‘i’ softkey (button 4).

Manual mode screens 

Automatic mode screens 

NOTE: The four softkey buttons are used for multiple functions

The four softkey buttons are used for multiple machine functions and 
menu navigations. Their function changes depending on the current 
screen and relates to the corresponding symbol directly above each 
softkey, across the bottom of the screen.

Summary of Contents for Twiner











































Reviews:

No comments

Brands by name

Popular brands

Load more brands