McHale
Twiner
23
6.1 Control box functions
* Functionality in relation to chopper unit knives applies only to models with chopper units!
No.
Function
Manual (MAN)
Automatic (AUTO)
1
Press and hold to engage the roller
and feed in twine
Press once to start the twine early or
to re-twine.
Hold to delay twine feeding.
2
Press and hold to move the twine
track towards the centre of the bale
Press once to cut the twine and bring
the track back to the home position
3
Press and hold to move the twine
track towards the edge of the bale.
Press to clear warning messages.
Press to clear warning messages
4
Information button. Press to toggle between the displayed information on
the right of the screen (bale total, density, target diameter, voltage, net/
twine, knife pressure and live bale diameter.)
5
No function
6
No function
7
Floor diverter
8
Knife diverter (Machines with chopper unit knives only)*
9
Release density pressure
10
No function
11
No function
12
No function
13
AUTO/MAN button.
Press to switch between manual and automatic modes.
14
Menu button.
Press once to enter the machine menu.
Also used to do a factory reset on the control box by holding down and
switching on the power to the box.
15
Emergency stop button.
Press to turn off the box. Twist clockwise to turn on.
