McHale 991B
Round Bale Wrapper
61
10
Road Traffic Safety & Operation
10.1 Before travelling on any public roadway
The following must be checked, as a minimum requirement, before moving the
machine on a public road.
1.
Bale lift arm must be in the fully raised position (if fitted). The transport lock
must be in the locked position while travelling on the road, see Figure 10.a.
2.
The hydraulic supply must be turned off and protected from accidental
activation by disconnecting the hydraulic feed line. Support all loose lines in a
safe manner.
3.
Ensure the lights are connected and working correctly. The bale damper must
be raised to comply with lighting regulations.
4.
Ensure the electronic control box or bale wrap computer is switched off.
5.
If plastic film is to be transported on the machine it must only be done so on the
holders provided and secured, if necessary.
6.
The operator must ensure that any other regulations regarding road use are
strictly adhered to.
Figure 10.a - Transport lock in the locked position
WARNING: Complete a full inspection before travelling on the road
Ensure that a full inspection is completed every time before attempting
to go on to a public roadway, always think and practice safety!
NOTE: Check lighting system before travelling on the road
Before travelling on a public road, the operator must ensure that the
complete (tractor and machine) lighting system is in a fully functioning
condition.
