McHale 991B
Round Bale Wrapper
33
7.3 991 BJS Controls
The 991 BJS is fitted with a hydraulic servo joystick. To carry out maintenance under
the table, the table must be locked in the upright position. The tap underneath the table
must be closed. The tap shown in the picture is in the open position, to close the tap
rotate it through 90 degrees. The table is then tipped as normal but it will not return
when the joystick is released to the neutral position. Place the safety bar in position
underneath the table. The safety bar must always be used when working under a
tipped table. To lower the table, remove the safety bar and slowly turn the tap to the
open position. The table will return to its resting position. Be extremely careful when
opening the tap as the table is lowered rapidly.
No.
Description
1.
Table rotate forward
2.
Lift arm down, press switch C
3.
Table tip
4.
Neutral (Table returns to resting position)
5.
Table rotate reverse
6.
Lift arm up, press switch C
