559-226-8196
4603 E. VINE AVE.
FRESNO, CA 93725
www.mcgaughys.com
- If you are the installer only, and not the owner of the vehicle, please make
sure the owner of the vehicle gets these instructions. They contain very
important information about the lift kit, maintainace, and warranty.
- Before moving forward with installation, please layout all parts from boxes
and ensure everything is present. If any parts are missing, please contact
McGaughy’s Suspension immediately at 559-226-8196.
- If you alter the finish of any of the provided components, like zinc plating,
chroming, or powder-coating, which can cause damage to the strength and
structure of the metal, any warranties will be null and void.
- If any components are ground on or modified in any way, then no returns or
exchages will be accepted and any warranties will be null and void.
- NO welding is required to install any part of this lift kit. Do not weld any
components.
- Over-sized tires and heavier wheels can cause premature wear on factory
and aftermarket components like ball joints, bushings, tie-rod ends, wheel
bearings, idler arms, drive-lines, etc.... You may need to replace / install new
components sooner than factory recommendations based on the tires and
wheels you choose. Please note that the heavier and wider wheels and tires
combined with aggressive driving (off-road and on highways) will cause more
wear on ALL moving parts, factory and aftermarket. Especially when vehicle is
in 4wd or Auto-4wd / AWD modes.
- Spindles and u-bolts are shipped with protective coating on surface. This
allows them to be delivered to you without rust. We recommend you clean
and paint the parts before you install, to protect against any future rust.
Remember, spindles and u-bolts are bare metal. And will rust without paint.
READ THESE ENTIRE INSTRUCTIONS
BEFORE STARTING ANYTHING
