CartPark Architectural |
Page 4 of 11
3
Secure back stopbar
Slide the stopbar into the back left and right vertical
posts openings as shown. Orient back stopbar notches
to face down prior to sliding into vertical post. Secure
Stopbar to right and left vertical post with 4, Taptite
¼-20 x 1.0” screws coated with wax from the outside
of the unit. Do not over-tighten screws.
4
Stopbar
Notch Cut
Overhang
Left Top Rail
Cut out opening
Slide Left Top Rail into
left vertical uprights
Slide Left Top Rail into left frame vertical uprights so
that the overhang leans toward the front of the unit.
Cut out openings should face inside the unit.
