CartPark Architectural |
Page 10 of 11
15
Installing the Plastic Barriers
Remove lid caps from barriers by squeezing base where shown and pulling lid cap upwards. Slide barriers onto
lower side rail and in between uprights. Slide C shape opening of barrier towards the vertical uprights until flush.
16
Lid Cap
Lid Cap
18.00
457
12.63in
321mm
towards vertical uprights
Barrier
Base
Lid Cap
Barrier
Base
Ballasting with Pea Stone, Sand or Gravel
Make sure unit is square and that is positioned straight and parallel inside parking space.
Important:
ballast Cart Corral unit with sand, pea shone or gravel. Fill each barrier base with 300 pounds of sand,
pea stone or gravel. The entire unit should be ballasted with a total weight of 1200 pounds. Balance the weight in
each barrier by pouring along the entire length of barrier. Avoid compacting the material; this is not necessary.
