![McCrometer ML255 Installation, Operation And Maintenance Manual Download Page 30](http://html.mh-extra.com/html/mccrometer/ml255/ml255_installation-operation-and-maintenance-manual_1753761030.webp)
MAIN MENU DESCRIPTIONS
Copyright © 2018 McCrometer, Inc. All printed material should not be changed or altered without permission of McCrometer.
Any published technical data and instructions are subject to change without notice. Contact your McCrometer representative
for current technical data and instructions.
www.mccrometer.com
3255 WEST STETSON AVENUE • HEMET, CALIFORNIA 92545 USA
Printed In The U.S.A.
TEL: 951-652-6811 • 800-220-2279 • FAX: 951-652-3078
Lit. # 30122-46 Rev. 1.2 / 5-31-18
28
9.2
Menu 2 - Scales
6. Press the Enter/Esc key.
1. Highlight the Fs menu and press the Enter/Esc key.
Fs
The full scale value measure set for flowrate. U.S. Standard and metric units are
selectable from this menu. See Appendix 1.0 for available units of measure.
To change the full scale value:
3.
Press the Right/Left key twice.
2.
Press the Up/Down key.
This will scroll
through the different
available units. See
Appendix 1.0
for
available units of
measure. Select the
desired unit.
This will highlight
the lower case letter
that represents the
time unit.
5.
Press the Right/Left key.
This will select the
numeric value.
Pressing the Up/
Down key to set the
digit and Right/Left
key to move to the
next digit.
If a unit you are looking for is not in the current list press the Right/
Left key and scroll to the “/” between the unit of measure and time unit
selections and press the Up/Down key to switch between U.S. Standard
and Metric units.
4. Press the Up/Down key.
This will scroll
through the
available time units.
The unit will
highlight.
This will save the
selection.
Once the desired value is entered quick push the Enter/Esc key to save the changes and then long push Enter/
Esc to exit back to the display.