20
File|Print - Print Displayed Data
Print the currently display data. Up to 32K characters currently displayed
are printed.
File|Font Select - Select display font and size.
File|Save Setup - Save Setup Parameters
The following program parameters are saved to the file I2C.INI. These
parameters are automatically loaded the next time the program is started.
ComPort Number
Display Options
Protocol Selection
Font Selection
Hints On/Off Selection
AddrMap - Display Address Map Grid
See the AddrMap control definition above.
ComPorts - Select Com Port
Select monitor connected com port and baud rate.
NOTE: The monitor defaults to 19200 baud at power up. Faster baud
rates can cause loss of data on some PCs.
ModeSelect|Remote Trace - Select Monitor Remote Mode
Bus messages captured by the monitor are uploaded for display.
ModeSelect|Dump Buffer - Select Monitor Dump Mode
Previously captured bus messages held in the monitor’s internal buffer
are uploaded for displayed.