28
Dump Trace Buffer terminates upon exhausting the buffer, or upon receiving an
Escape <ESC> character on the serial port.
Screen Pause <Ctrl-S> and Screen Resume <Ctrl-Q> are active.
Example: D<Enter>
In the above example, buffered bus messages are uploaded to the Host system in
ASCII format during a Dump Trace Buffer operation. See the ASCII Remote
Select command for format details.
Syntax: E
Description:
The Enable Bus Simulation command causes the unit to emulate bus traffic
without a bus connection. Emulation provides a learning and testing platform
without the need for a working bus.
Bus simulation repetitively generates the following three messages:
10234836536C36C36F500
-
Start #2, “Hello”, Stop
10435736F37236C364500
-
Start #4, “World”,
Stop
2FF500
-
Start #FFH, Stop
See ASCII Remote Select for details on ASCII format.
Once enabled, bus simulation remains in effect until the next unit power-up
cycle.
Bus simulation can also be enabled by pressing the BUFFER-UP key during the
unit power-up sequence.
Enable Bus Simulation
