You must connect directly to the console for initial configuration. You can't configure the NTBA Appliance
remotely.
The required settings for HyperTerminal are:
Name
Setting
Baud rate
115200
Number of Bits
8
Parity
None
Stop Bits
1
Control Flow
None
The procedure for cabling the console port of NTBA Appliance T-1200 and T-600 is similar.
10 Connect the power cables
Connect one end of the power cable to the NTBA Appliance. Plug the other end of the power cable into a
grounded electrical outlet or a separate power source such as an uninterrupted power supply (UPS) or a
power distribution unit (PDU).
When you connect power to the appliance, the appliance will immediately turn on and boot up.
11 Install the Manager software
a
Prepare the system according to the requirements outlined in the McAfee
®
Network Security Platform
Installation Guide and McAfee Network Security Platform Release Notes.
b
Close all open applications.
c
Insert the Manager CD into the appropriate drive of the Windows server that you want to use as your
Manager server. Follow the instructions in the
Installation Wizard
as it guides you through the entire
process.
You must have administrator rights on the target Windows server to install the Manager
software.
A MySQL database is included with the Manager and is installed (embedded) automatically on
your target Windows server during this process.
7
