k
At the
Please enter the sensor default gateway(A.B.C.D)
prompt, type the IP address. Use
the same convention as for the Sensor IP address.
Note that you should be able to ping the gateway. The gateway should be reachable.
Example:
192.34.2.8
l
Make sure you have set a shared secret key on the Manager for this Sensor.
m
At the
Please enter shared secret key
prompt, type the shared secret key value. This value is used
to establish a trust relationship between the NTBA Appliance and the Manager.
n
Type the same shared secret key value that you typed in the
Add New Device
page of the Manager.
The NTBA Appliance prompts you to verify the value. Make sure that the configuration settings to this
point have successfully established the NTBA Appliance on the network.
o
Type the value again and press
ENTER
.
You can change the NTBA Appliance password by using the
passwd
command.
A password must be between 8 and 25 characters, is case-sensitive, and can consist of any alphanumeric
character or symbol.
McAfee strongly recommends that you choose a password with a combination of characters
that is easy for you to remember but difficult for someone else to guess.
14 Verify successful NTBA Appliance configuration
You can check whether the NTBA Appliance is configured and is available by executing the following actions:
Verification process
You can check the NTBA Appliance configuration as follows:
•
At the NTBA Appliance console type
status
.
The status information of the NTBA Appliance is displayed. This includes information on whether the
NTBA Appliance is initialized and its health status.
•
At the NTBA Appliance console type
show
.
The system information is displayed. This includes information on system uptime and the status of the
Management port link.
To exit the session, type
exit
.
•
To view or configure the settings of the collection ports for the NTBA appliance, you access the
configuration page in
Devices
|
<Admin Domain Name>
|
Devices
|
<Device Name>
|
Setup
|
Physical Ports
.
Download the latest NTBA Appliance software
a
Select
Manager
|
<Admin Domain Name>
|
Updating
|
Download Device Software
.
The
Download Device Software
page is displayed.
b
Select the latest software listed under
Software Available for Download
and click
Download
.
The
Download Status
window is displayed.
11
