1
Install the mounting rails
Position the mounting rails correctly and install them at same levels.
a
At the front of the rack, position one of the mounting rails so that its mounting bracket aligns with the
required rack holes. Clip the rail into the rack.
Figure 1 Slide rail installation
b
At the back of the rack, pull the back mounting-bracket (extending the mounting rail) so that it aligns with
the required rack holes.
c
Clip the rail to the rack and secure it.
d
Repeat these steps to secure the second mounting rail to the rack.
e
Make sure that the mounting rails are at the same level on each side of the rack.
Make sure that you follow the safety warnings. When identifying where you want the NTBA
Appliance to go in the rack, remember that you should always load the rack from the bottom
up. If you are installing multiple NTBA Appliances, start with the lowest available position first.
NTBA Appliance T-200 and T-500 Quick Start Guide
Revision B
McAfee Network Security Platform
1
