Page 23
Alterations reserved
Operating Manual
Stand 01/2004
SBAP 46/72/82-ME ENG
5.2
Infeed table
5.2.1
Infeed tapes
The products delivered from the folding
machine are taken by the round belts 1.
Positioning of tape rollers 2 and 3:
Loosen the screw 4 and displace the
guide 5.
The distance between the upper and
lower round belts may be adjusted for
product thickness by displacing the
upper tape rollers 8 and 2 and by
loosening the screws 7 at the collector
flange 7. Usually, this is only necessary
if you process very heavy products.
Remove the protective hood 6, loosen
the screws and nuts 7 and adjust the
tape rollers 2 or 8.
Make sure that they are adjusted
equally at both sides!
Re-fasten the screws and nuts 7 and
replace the protective hood 6.
>DANGER< Before you perform these
actions it is absolutely imperative that
you activate the „EMERGENCY STOP“
or turn OFF the main switch of the
delivery. Otherwise risk of injury!
