
Page 33
Alterations reserved
Operating Manual
Stand 10/2006
SBAP 46/72/82-ME USA
continuation
This forward feed can be adjusted
through the knurled screw
13
:
Clockwise screwing of the knurled
screw
13
reduces forward feed.
Counter-clockwise screwing of the
knurled screw
13
increases forward
feed.
A retaining angle
14
is used to avoid the
tilt of the pile on the line-up table.
After loosening the knurled screw
16
the attachment plate
15
may be turned
or removed for various heights of
signatures.
Two retaining angles are used if you
process two-up productions.
The transport tapes
1
,
2
and
12
should
only be displaced laterally in exceptional
cases.
At first, you should attempt to vary the
infeed position of the sheets into the
delivery by changing the position of the
delivery or by slanting the infeed tapes.
If you displace the transport tapes you
should ensure that all tape rollers for
each single transport tape are equally
displaced. We recommend using a tape
rule and measure from the delivery’s
side panel. Locking screws are fixed in
all tape rollers.
The lower transport tapes
1
are
displaced through the tape rollers
17
The upper transport tapes
2
are
displaced through the tape rollers
13
,
and the pile transport tapes are
displaced through the tape rollers
19
.
>ATTENTION<
Make sure that these
tapes do not rub laterally as they may be
destroyed.