Alterations reserved
Operating Manual
SBAP 46/72/82-ME ENG
Stand 01/2004
Page 8
2.0
BASIC SAFETY INSTRUCTIONS
2.1
Warnings and symbols
The following designations or symbols are used for very special instructions in this Operating
Manual:
>NOTICE< Special instructions in respect to the economical use of the machine.
>ATTENTION< Special instructions or requirements and prohibitions to avoid injuries and damage.
>DANGER< Instructions or requirements and prohibitions to prevent personal injuries or extensive
damage.
2.2
Safety in the working place Destined use of the Vertical Stacker Delivery
2.2.1
MBO units correspond to their prescribed Safety Technical Requirement at the time of their shipment.
For this purpose, any moveable and rotating parts are covered with protective hoods and
are mechanically or electrically interlocked to such an extent as to not unreasonably detract from
the operation.
- Single person operation only (insufficient view at the drive side).
2.2.2
With technical safety precautions it is extremely important that all operating personnel receive
sufficient technical safety instructions and are advised of all potential sources of danger. However,
it must be remembered that even with proper use of the machine, accidents can occur which
present a danger to life and limb of the operator or third parties. Respectively, it does not exclude
the detraction of the machine and other material assets.
2.2.3
The delivery should only be operated when in good working order. Any malfunctions that may
impair safety must be removed immediately by trained personnel of the manufacturer/supplier.
2.2.4
The delivery is exclusively designed to handle folded paper sheets. The processing of any other
materials should not be attempted as the manufacturer or supplier will not be liable for any resulting
damage.
2.2.5
Carefully read the complete Operating Manual, including the Safety and Service Requirements,
before you operate the machine.
2.2.6
The Operating Manual should be kept with the machine at all times.
2.2.7
Complete the Operating Manual, if necessary with internal Safety Instructions, as well as with
the legal regulations for the Prevention of Accidents.
